Recently, the epidemic situation across the country is gradually declining, many companies have begun to resume work, and everything is getting warmer, including the weather, because spring is here.

Spring is the season for the recovery of all things. The air humidity gradually increases. Spring becomes the most active time for various bacteria. Colds and fevers are easy to occur in spring.

The survival of bacteria requires a certain temperature and humidity, and most bacteria are not resistant to high temperature, and 20 ℃ is the most suitable for growth, so spring is like a greenhouse warm bed for bacteria to survive and multiply.

For factories or enterprises, the control of indoor environmental humidity is a very important job, because it is not only related to the comfort of the staff working in the environment, but also related to personnel health issues, but also related to the economic benefits and safety hazards of the enterprise. .

The machines in the production workshop are basically metal equipment. Once the ambient humidity is too high, it is easy to rust or even break down, causing potential safety hazards and affecting the production efficiency and product quality of the company. At the same time, the loss of machines also causes economic losses for the company.

Most of the products in storage are packaged in carton boxes. When the humidity is too high, the carton boxes are prone to moisture and mildew, become soft, have no bearing capacity, and cannot be handled and stacked.

In addition, there are archives for paper storage, underground garages, computer rooms, etc., which will cause damage due to moisture.

Conventional Industrial Dehumidifiers

The dehumidification principle of a conventional dehumidifier is to pump humid air into the machine, drive the evaporator and condenser through the compressor, condense the moisture in the air into water droplets for collection, and then discharge the warm and dry air after treatment. Circulation reduces indoor humidity.

Conventional industrial dehumidifiers are widely used in enterprise units and factory workshops, and most of them are selected according to the applicable area and humidity requirements.

Explosion-proof dehumidifier

Chemical production often encounters various explosive gases and vapors. In places with these media, appropriate explosion-proof electrical appliances should be correctly selected in accordance with relevant norms, standards and regulations.

Explosion-proof dehumidifier is a kind of explosion-proof electrical equipment, which is used for a class of electrical equipment where there are explosive dangerous gases and vapors. It is mainly used for air dehumidifiers in flammable and explosive environments such as petroleum, chemical, military, oil depots, and offshore oil platforms. It is an important measure to ensure safe production and prevent explosions and fires.

Rotary dehumidifier

The rotary dehumidifier is based on the principle of physical adsorption. When the air passes through the rotating dehumidification wheel, the water vapor is adsorbed by the porous honeycomb-shaped dehumidification wheel, and the air coming out is dry; when the rotating dehumidification wheel passes through the regeneration area, the adsorbed water is heated and turned into water vapor again, and the water vapor is discharged through the pipeline. , and finally realize the control of the ambient air humidity.

The most significant advantage of rotary dehumidifiers is that dehumidification is not limited by the temperature of the environment. The operation of conventional industrial dehumidifiers is limited by the ambient temperature. When the ambient temperature is lower than 18 °C, the dehumidification effect will be significantly reduced, while the rotary dehumidifier can still operate normally. It is the first choice for special low-temperature environments such as medicine, chemical laboratory, lithium battery industry, and military industry for scenarios with low humidity and requirements for humidity control.